<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.6000.16850" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV>I have almost got it functioning.A few more questions:</DIV>
<DIV>1)Since I have switched to GC I assume that in addition to having them
wired in series I must also have them in parallel for the link 10 to
monitor them as 1 bank?</DIV>
<DIV>2) I have changed the factory default settings for Ah from 200 to 440.
However from what I gather from the manual, I must charge the
batteries until the far right LED starts flashing.Will the Ah function go
up to 440Ah and then go up and down as Ah are used and replenished.</DIV>
<DIV>Must the shunt sense the Ah going in before I will get the 440 Ah
reading.</DIV>
<DIV>Some day I hope to understand this electrical
stuff !!</DIV>
<DIV>Thank you,</DIV>
<DIV>Bill</DIV></BODY></HTML>