<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=us-ascii">
<META content="MSHTML 6.00.2900.3527" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV dir=ltr align=left><SPAN class=915265700-01072009><FONT face=Arial
color=#0000ff size=2>Yes -- The aft most hole is where the clear plastic and
longer end of the metal "L" pin (that goes through the end of the yellow and
white plastic stripper)</FONT></SPAN></DIV>
<DIV dir=ltr align=left><SPAN class=915265700-01072009><FONT face=Arial
color=#0000ff size=2></FONT></SPAN> </DIV>
<DIV dir=ltr align=left><SPAN class=915265700-01072009><FONT face=Arial
color=#0000ff size=2>the front hole is where the little end of the metal "L" pin
goes</FONT></SPAN></DIV>
<DIV dir=ltr align=left><SPAN class=915265700-01072009><FONT face=Arial
color=#0000ff size=2></FONT></SPAN> </DIV>
<DIV dir=ltr align=left><SPAN class=915265700-01072009><FONT face=Arial
color=#0000ff size=2>The picture I sent before should
help</FONT></SPAN></DIV><BR>
<DIV class=OutlookMessageHeader lang=en-us dir=ltr align=left>
<HR tabIndex=-1>
<FONT face=Tahoma size=2><B>From:</B> c36list-bounces@c36ia.com
[mailto:c36list-bounces@c36ia.com] <B>On Behalf Of </B>Bill
Hague<BR><B>Sent:</B> Tuesday, June 30, 2009 12:41 PM<BR><B>To:</B>
c36list@c36ia.com<BR><B>Subject:</B> [C36IA] Maxwell freedom 800 -Pressure arm
replacement kit<BR></FONT><BR></DIV>
<DIV></DIV>
<DIV>The diagram in the owners manual and the diagram that came with the part
show that the arm is positioned aft of the axel,I think that is what is called.
I am attaching 2 pictures of the disassembled windlass. On the left side of the
photo there appears to be a hole to insert the pin but this is forward of the
axel. Any help would be appreciated.</DIV>
<DIV>When I did this 5 years ago the old pressure arm was still in place so I
could see where it went. Unfortunately this time I found it in the anchor
locker.</DIV>
<DIV>When I called Maxwell for the replacement kit I was instructed to get it
from WM. FYI the WM # is 2495349. Bill Miller tells me that it is also available
at Defender.</DIV>
<DIV>Bill</DIV>
<DIV style="FONT: 10pt arial"><FONT face="Times New Roman"
size=3></FONT> </DIV>
<DIV style="FONT: 10pt arial"><FONT
color=#800000></FONT> </DIV></BODY></HTML>