[C36IA] Maxwell freedom 800 -Pressure arm replacement kit

[Tom Senator (tsenator)]

Yes -- The aft most hole is where the clear plastic and longer end of
the metal "L" pin (that goes through the end of the yellow and white
plastic stripper)
 
the front hole is where the little end of the metal "L" pin goes
 
The picture I sent before should help

________________________________

From: c36list-bounces at c36ia.com [mailto:c36list-bounces at c36ia.com] On
Behalf Of Bill Hague
Sent: Tuesday, June 30, 2009 12:41 PM
To: c36list at c36ia.com
Subject: [C36IA] Maxwell freedom 800 -Pressure arm replacement kit


The diagram in the owners manual and the diagram that came with the part
show that the arm is positioned aft of the axel,I think that is what is
called. I am attaching 2 pictures of the disassembled windlass. On the
left side of the photo there appears to be a hole to insert the pin but
this is forward of the axel. Any help would be appreciated.
When I did this 5 years ago the old pressure arm was still in place so I
could see where it went. Unfortunately this time I found it in the
anchor locker.
When I called Maxwell for the replacement kit I was instructed to get it
from WM. FYI the WM # is 2495349. Bill Miller tells me that it is also
available at Defender.
Bill
 
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.c36ia.com/pipermail/c36list/attachments/20090630/f2ab0fa9/attachment.htm