[C36IA] golf cart batteries

[Gene Foraker]

1.   I don't recall what size the cables are.    They were the largest 
standard size WM carried already made up.   Since I now know they will 
make up what ever you want, go with the size similar to what is already 
there.

2.  I have a bias against permanently wiring batteries into a parallel 
bank without a switch.   Unless you have a separate starting battery, 
you should easily be able to parallel the two 6 volt banks with the 
standard battery switch, just as you can do now with the standard 
factory 4D installation.   Treat two 6 volt batteries connected in 
series just as you would a single 4D.

Gene

Bill Hague wrote:
> Thanks to Gene, Bob & Bill for the suggestions, and thank you to Gene 
> and Mike for the photo's. I picked up the batteries this morning so I 
> can now start measuring for the cables.
> A few more questions:
> 1) Did you use 2/0 cables?
> 2)I had my 4d's connected in parallel to increase amp hour capacity. 
> Is there any downside to doing this with the GC, after they are 
> connected in series.My goal would be to reduce the percentage of amp 
> hours removed in between charges?
> Bill Miller,
> I thought you were still using the 4D's?
> Thanks
> Bill
> ------------------------------------------------------------------------
>
> _______________________________________________
> C36list mailing list
> C36list at c36ia.com
> http://www.c36ia.com/cgi-bin/mailman/listinfo/c36list
>