[C36IA] Engine Temp

[Steve]

Do you have a 2" or 3" heat exchanger?  Older boats (I'm not sure if yours is one) came with a 2" heat exchanger.  It was undersized.  Assuming no other problems you could still overheat with it.  I switched to a 3" and have had no further problems.

Steve





________________________________
From: Chuck Monsees <monseesmas at roadrunner.com>
To: Catalina 36 Association Mailing List <c36list at c36ia.com>
Sent: Wednesday, July 1, 2009 8:42:38 AM
Subject: [C36IA] Engine Temp

 
 
I know this has been discussed in the 
>  past, and I would like some ideas as to what I need to do.
> 
>My engine runs at 200 to 210 at 1800 - 2000 
>  rpms.  It will overheat if I attempt 2200 rpms.
> 
>I have cleaned the heat exchanger, put a new 
>  fresh water pump on the engine, and a new impeller in the raw water 
>  pump.  Any ideas of what to do next?
> 
>Thanks
> 
>Chuck Monsees
>"Katie Nell"
># 1079
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.c36ia.com/pipermail/c36list/attachments/20090701/0b29d616/attachment.htm